Samsung Galaxy A50 Speaker Replacement Guide | Galaxy A50s Repair

Galaxy A50 | A50S2 years ago209 Views

Hi everyone, welcome back to Geardo!

If your Samsung Galaxy A50 or Galaxy A50s has no sound for calls, music, or notifications, then the loudspeaker (ringer) may be faulty.

In this guide, we will show you how to replace the loudspeaker (ringer) on the Samsung Galaxy A50. This guide is also fully compatible with the Samsung Galaxy A50s, as both devices share a very similar internal design.

This is a beginner-friendly repair guide, so follow each step carefully to complete the repair safely.


Repair Overview

  • Device Type: Smartphone
  • Repair Type: Loudspeaker (Ringer) Replacement

Repair Difficulty: ⭐⭐⭐☆☆ (Moderate)

Estimated Time: ⏱️ 30–45 minutes


Reasons for This Repair

  • No sound from loudspeaker
  • Low or distorted audio
  • No ringtone during incoming calls
  • Speaker crackling or muffled sound
  • Audio not working for media playback

Protect Your Samsung 


Before You Begin

Compatibility and Model Numbers

  • Samsung Galaxy A50
  • Samsung Galaxy A50s

This repair guide based on Samsung Galaxy A50 Model.

Model Numbers | SM-A505F, SM-A505FN, SM-A505GN, SM-A505G, SM-A505FM, SM-A505YN, SM-A505W, SM-A505X, SM-A505U, SM-A505GT, SM-A505U1, SM-A505G, SM-A505N, SM-S506DL, SM-A507F, SM-A507FN, SM-A5070

Tools Required

  • Mobile phone heating pad or hairdryer/heat gun
  • Plastic pry tool / card pry
  • Suction cups
  • Phillips #00/#000 screwdrivers
  • Tweezers (for connectors)
  • B7000 glue or double-sided adhesive (for back cover)
  • Rubber bands or bonding clips to secure the back cover

Using proper tools reduces the risk of damaging the phone.

How to Find Tools and Parts


Step-by-Step Repair Guide

Step 1: Power Off the Device

Turn off your Galaxy A50 / A50s completely before starting.


Step 2: Heat and Open the Back Cover

Gently heat around the edges of the back cover to soften the adhesive.

  • Use a heating pad or heat gun
  • Use a suction cup and pry tool to create an opening

Step 3: Remove the Back Cover

  • Insert a plastic pry tool or card
  • Carefully slide around the edges to cut the adhesive
  • Remove the back cover

Step 4: Remove the Midframe

  • Remove the SIM tray
  • Unscrew all visible screws
  • Use a pry tool to release the clips
  • Lift and remove the midframe

Step 5: Remove the Faulty Loudspeaker

  • Locate the loudspeaker (ringer) module at the bottom
  • Carefully remove the faulty speaker

Step 6: Install the New Loudspeaker

  • Place the new speaker module into position
  • Ensure proper alignment

Step 7: Reassemble the Midframe

  • Place the midframe back into position
  • Ensure clips are secured properly
  • Tighten all screws
  • Insert SIM tray

Step 8: Seal the Back Cover

  • Apply adhesive if needed
  • Use B7000 glue or double-sided adhesive

Step 9: Secure the Back Cover

  • Press firmly along the edges
  • Use clips or rubber bands
  • Leave it for proper bonding

FAQs (Frequently Asked Questions)

Q1: Is this guide compatible with Galaxy A50s?

Yes, both A50 and A50s have similar internal layouts, so this guide works for both.


Q2: How do I know if my loudspeaker is faulty?

If you hear no sound, distorted audio, or very low volume, the speaker likely needs replacement.


Q3: Can I clean the speaker instead of replacing it?

Sometimes cleaning helps, but if the issue persists, replacement is the best solution.


Q4: Is this repair beginner-friendly?

Yes, it is moderate and manageable with basic tools and careful handling.


Q5: Will replacing the speaker fix ringtone issues?

Yes, if the loudspeaker is faulty, replacing it will restore ringtone and media sound.


Troubleshooting (After Repair)

Q1: No sound after replacement

  • Check speaker alignment
  • Ensure proper contact with connectors

Q2: Low or distorted sound

  • Ensure speaker is seated properly
  • Check for dust or debris

Q3: Phone not closing properly

  • Check internal component placement
  • Ensure no cables are obstructing

Q4: Back cover not sticking

  • Apply new adhesive
  • Use clips or rubber bands

Q5: Sound works only sometimes

  • Recheck speaker placement
  • Ensure no loose connections

Final Thoughts

Replacing the loudspeaker (ringer) on your Samsung Galaxy A50 or A50s is a simple and effective way to restore sound for calls, music, and notifications.

Take your time, follow each step carefully, and you’ll be able to complete the repair successfully.

I hope you enjoyed this guide! If you have any questions, feel free to ask.

Other Repair Guides

Check How to replace the Battery on Samsung Gaalxy A50/ A50s

Galaxy A12 sounds not working?

Galaxy A52 5G no sound is coming?

0 Votes: 0 Upvotes, 0 Downvotes (0 Points)

Leave a Reply

Sign In/Sign Up Sidebar Search
Popular Now
Loading

Signing-in 3 seconds...

Signing-up 3 seconds...

Discover more from DIY Repair Guide to fix Your Device

Subscribe now to keep reading and get access to the full archive.

Continue reading