Samsung Galaxy A53 5g Fingerprint Sensor Replacement Guide

Hi everyone, welcome back to Geardo 👋

Today, we will show you how to replace the fingerprint sensor (Touch ID) on the Samsung Galaxy A53 5G mobile phone. If your fingerprint scanner is not responding, failing to recognize fingerprints, or shows error messages, replacing the fingerprint sensor module can fix the issue and restore biometric security.

This guide provides a clear step-by-step process to safely replace the fingerprint sensor without damaging other components.

---

🛡️ Reasons to Replace the Fingerprint Sensor

Q: Why does the fingerprint sensor stop working on the Galaxy A53 5G?
A: Common reasons include:

• Fingerprint not recognized
• Sensor showing error messages
• Touch ID not responding
• Sensor failure after dropping the phone
• Water or moisture damage
• Dust or debris under the sensor
• Software updates causing sensor issues

Replacing the sensor module restores accurate fingerprint scanning and biometric security.

---

🛠️ Repair Difficulty

Difficulty Level: ⭐⭐☆☆☆ (Easy to Moderate)
Estimated Repair Time: 20–30 minutes

This repair is relatively simple and does not require logic board removal. It mainly involves removing the back cover and replacing the sensor module.

---

Before You Begin

Compatibility and Model Numbers

This repair guide based on Samsung Galaxy A53 5G Model.

Model Numbers | SM-A536B, SM-A536B/DS, SM-A536U, SM-A536U1, SM-A5360, SM-A536E, SM-A536E/DS, SM-A536V, SM-A536W, SM-A536N, SM-S536DL

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/3HJHH10
  • Screen – https://amzn.to/45KbBKn
  • Other Parts – https://amzn.to/45AsU1W
• Silicone Work Repair Mat https://amzn.to/45Emz5l

---

Protect Your Samsung Galaxy A53 5G

• Protector For The Screen https://amzn.to/3VcdiLJ
• Best Rated Case https://amzn.to/4oH4qvc

---

📱 Samsung Galaxy A53 5G Fingerprint Sensor Replacement – Step-by-Step Guide

Step 1: Power Off the Phone

Turn off the Samsung Galaxy A53 5G completely before starting the repair.

---

Step 2: Heat the Back Cover

Gently heat around the rear cover edges until the adhesive softens.

• Place the back cover side on a heating pad
• Select the mobile phone HEATING option and allow it to complete
• Alternatively, use a heat gun or hairdryer evenly around the edges

---

Step 3: Remove the Back Cover

• Use a suction cup to create a small opening
• Insert a plastic card pry tool to cut the adhesive
• Carefully lift and remove the back cover

---

Step 4: Remove the Main Board Frame

• Undo eight screws securing the main board frame
• Remove the frame and set it aside

---

Step 5: Remove the Speaker Cover

• Remove the speaker cover at the bottom of the phone
• Remove the screws securing the cover
• Lift and remove the speaker cover

---

Step 6: Remove the Faulty Fingerprint Sensor

• Locate the fingerprint sensor module connected to the charging board
• Disconnect and remove the not working fingerprint sensor

---

Step 7: Install the New Fingerprint Sensor

• Place the new fingerprint sensor module in position
• Ensure it fits correctly and connects securely

---

Step 8: Reinstall the Speaker Cover

• Place the speaker cover back in position
• Secure it using the screws

---

Step 9: Reinstall the Main Board Frame

• Place the main board frame back into the phone
• Secure it using eight screws

---

Step 10: Reattach the Back Cover

• Check if the back cover has enough adhesive
• If not, apply B7000 glue or new double-sided adhesive

---

Step 11: Secure the Back Cover

• Use bonding clips to tighten the rear cover
• Alternatively, use rubber bands
• Leave it for some time to ensure proper bonding

---

❓ Frequently Asked Questions (FAQ)

Q: Will replacing the fingerprint sensor erase my data?
A: No, this repair does not affect stored data.

Q: Will my fingerprint still work after replacement?
A: Yes, but you will need to re-register your fingerprints after installing the new sensor.

Q: Can I fix the fingerprint sensor without replacing it?
A: Sometimes cleaning or resetting the phone helps, but a faulty sensor usually requires replacement.

Q: Is the fingerprint sensor integrated with the charging board?
A: Yes, in the Galaxy A53 5G, the fingerprint sensor is part of the charging board assembly.

---

🧩 Troubleshooting (After The Repair)

Q: Fingerprint sensor still not working after replacement.
A: Recheck the connector and ensure it is properly seated.

Q: Phone shows “Fingerprint sensor error”.
A: Reboot the phone and re-register fingerprints. If the issue persists, check the connector and sensor module.

Q: Fingerprint works intermittently.
A: Ensure the sensor is clean and the connector is fully attached.

Q: Back cover not sticking properly.
A: Use fresh adhesive and apply pressure using bonding clips or rubber bands.

---

✅ Final Thoughts

I hope you have enjoyed this Samsung Galaxy A53 5G fingerprint sensor replacement guide 🔒

If you have any questions, feel free to share and comment on our videos.
👉 Do not forget to hit the subscribe button for more step-by-step repair guides from Geardo!

Related Repair Guides

• Check Out More Samsung galaxy A53 5G Guides
• Replace Faulty Front & Rear Cameras on Galaxy A52 5g