Google Pixel 4a 5G LCD Screen Display Replacement Guide

The Google Pixel 4a 5G uses a bonded display assembly, so replacing a damaged LCD screen requires carefully softening and cutting the adhesive around the screen edges. In this guide, we walk through the process of removing the broken display, disconnecting its connector, preparing the frame, testing the replacement, and securing the new screen in place.

This Google Pixel 4a 5G screen replacement guide is written for beginners and follows the repair procedure shown in the source guide.

Repair Information

Repair Information	Details
Device	Google Pixel 4a 5G
Repair Type	LCD Screen Display Replacement
Repair Difficulty	★★★☆☆
Estimated Time	Varies depending on adhesive removal

Reasons for the Repair

A Pixel 4a 5G may require an LCD screen replacement when the existing display is broken or damaged. If the screen needs to be removed from the phone, the adhesive around its edges must first be softened so the display can be separated without unnecessarily damaging the surrounding parts.

---

Before You Begin

Compatibility and Model Numbers

This repair guide based on Google Pixel 4A 5G Version

Model Numbers | GD1YQ, G025I

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Torx T3 screwdriver
• Torx T4 screwdriver
• Torx T5 screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heat Mat / Heating Pad – https://amzn.to/3H0tHzJ
• Best Portable Heat Gun – https://amzn.to/4cZYnhL
• Clamps – https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit – https://amzn.to/3UO1jUx
• Stronger Suction Cup – https://amzn.to/3UVb6YR
• Silicone Work Repair Mat – https://amzn.to/4euW6fs
• Must Have Glue | Adhesive – https://amzn.to/4uxhKog
• Compatible Parts –
  • Battery – https://amzn.to/3HThE7P
  • Screen – https://amzn.to/3HTgCIZ
  • Other Parts – https://amzn.to/4meWmzB

---

Step-by-Step Repair

Step 1: Soften the Screen Adhesive

Important: Heat the screen gently. Do not rush the heating process.

Place the Google Pixel 4a 5G with the front screen facing down on the heating pad. Select the mobile phone heating option and allow the heating cycle to complete.

The purpose of heating is to soften the adhesive holding the display around its edges. If you do not have a heating pad, the source guide also mentions using a heat gun or hairdryer as an alternative.

---

Step 2: Separate the Screen From the Body

Once the adhesive has softened, use a suction cup to lift the screen slightly. This creates enough space to insert a plastic card pry tool or something similar underneath the display.

Work carefully around the screen edges, using the card pry tool to cut through the softened adhesive.

Isopropyl alcohol can also be used around the screen edges to help dissolve the glue. Take your time and gently work the pry tool around the display rather than forcing it.

---

Step 3: Lift the Display and Access the Connector

Gradually lift the screen until it is approximately 90 degrees from the top of the phone.

With the display lifted, use tweezers to remove the adhesive and bracket covering the LCD connector.

Be careful while lifting the display and accessing this area. The goal is to expose the connector so the damaged screen can be disconnected.

---

Step 4: Disconnect the LCD Connector

With the connector accessible, disconnect the LCD connector.

Once the connector is disconnected, the broken screen can be separated completely from the phone body.

---

Step 5: Clean the Screen Frame

Before installing the replacement display, clean the edges of the phone frame.

Remove any remaining pieces of broken glass and adhesive so the replacement screen can sit correctly against the body.

Take care during this stage, as leftover glass or adhesive can interfere with the installation of the new display.

---

Step 6: Connect the Replacement Screen

Place the new LCD screen onto the phone and connect its LCD connector to the body.

Once the connector is connected, reinstall the LCD connector bracket and place the adhesive as shown in the repair procedure.

---

Step 7: Test the Replacement Display

Turn on the Google Pixel 4a 5G and verify the replacement LCD screen before permanently installing it.

Testing at this stage is useful because the display can still be accessed before the final installation is completed.

---

Step 8: Prepare the Display Adhesive

Before installing the LCD screen, check that there is enough adhesive available to secure it.

If additional adhesive is needed, the source guide recommends using B7000 glue or new double-sided LCD adhesive.

Make sure the screen and frame are ready before moving on to the final installation.

---

Step 9: Install the New LCD Screen

Gently slide the screen into position, starting from the bottom and then moving toward the top.

Once the display is positioned correctly, apply slight pressure around the screen edges so it sits against the body.

Avoid applying unnecessary force while positioning the replacement screen.

---

Step 10: Secure the Screen With Bonding Clips

Finally, use bonding clips to hold the LCD screen firmly against the phone body.

Leave the clips in place for some time to allow the screen to bond securely. If bonding clips are not being used, the source guide also mentions using rubber bands to tighten the screen against the body.

After the screen has been secured, remove the clips or rubber bands.

End of Repair Guide

The Google Pixel 4a 5G LCD screen replacement is now complete. Turn on the phone and verify that the replacement display is functioning correctly before considering the repair finished.

---

FAQ

1. Can I replace the Google Pixel 4a 5G screen myself?

Yes, this guide is written to make the procedure easier for beginners to follow. However, separating the bonded screen requires patience and careful handling of the display and connector.

2. How do I soften the Pixel 4a 5G screen adhesive?

The source guide uses a heating pad to gently heat the screen and soften the adhesive around its edges. A heat gun or hairdryer can also be used as an alternative.

3. Can I use isopropyl alcohol during the screen removal?

Yes. The repair procedure uses isopropyl alcohol around the screen edges to help dissolve the adhesive while the plastic card pry tool is used to cut through it.

4. Do I need to test the replacement screen before installing it?

Yes. The procedure specifically calls for turning on the device for verification and testing before the LCD screen is finally installed.

5. What adhesive can I use to secure the replacement screen?

The source guide recommends B7000 glue or a new double-sided LCD adhesive if the screen does not have enough existing adhesive.

6. How do I hold the new screen in place while the adhesive bonds?

Bonding clips can be used to fasten the screen to the phone body. The guide also mentions using rubber bands as an alternative.

---

Troubleshooting

1. The replacement LCD screen is not working. What should I check?

First, check the LCD connector and make sure it has been properly connected. The repair procedure requires testing the display before completing the final installation.

2. The screen is difficult to remove from the phone.

The adhesive may not have softened enough. Gently heat the screen again and continue working around the edges with the plastic card pry tool rather than forcing the display.

3. There is still adhesive around the phone frame.

Clean the frame edges and remove the remaining adhesive before installing the replacement screen. The frame should also be checked for remaining pieces of broken glass.

4. The replacement screen is not sitting correctly.

Remove any remaining broken glass or adhesive that may be preventing the display from sitting properly. Recheck the positioning before securing the screen.

5. The new screen is not staying attached.

Check that there is enough adhesive around the display. If necessary, use B7000 glue or new double-sided LCD adhesive as described in the repair procedure. Bonding clips or rubber bands can then be used to hold the screen against the body while it bonds.

---

Related Guides

View more Pixel 4A 5G Repair Guides

Check Pixel 4A Repair Guides