DIY Huawei P20 lite Front & Rear Camera Repair Guide

Before Starting, we need the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone and then remove the back cover.

Here, we are using a heating pad to remove the back cover, Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes.

Alternatively, you can use a heat gun or hairdryer. Once you feel the heating is enough, use a suction cup to lift the back cover.

In between, Insert a Plastic Card pry tool and gently cut the adhesive.

While removing the back cover, Be gentle; the fingerprint plug is attached to the back cover.

Next, remove the bracket by undoing two screws.

Next, disconnect the battery plug and the fingerprint plug.

Now the back cover unit can leave from the body.

Next, undo five screws to take out the top bracket.

Next, disconnect and pull out the not working front camera from the board.

Next, pull out the 2-in-1 rear camera unit by disconnecting two connectors.

Next, place the new 2-in-1 rear camera unit by connecting plugs.

Next, place & secure the new front camera to the board.

Next, place the bracket by adding five screws.

Next, connect the fingerprint and battery plug to the board.

Next, place the bracket by adding two screws.

Next, Before installing the main back cover, ensure it has enough glue.

If not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to fasten the back cover.

Leave it for some time and remove it; if not, use some rubber bands to tighten the back cover.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.