DIY Motorola Moto G Fast XT2045 Front & Rear Camera Repair Guide

Before Starting, we need the right tools to proceed with the repair, which you can find in the description.

First, take out the back cover from the body. To remove the back cover it needs to heat gently around the back cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad and, select the mobile phone heating option, and leave it till it completes.

Alternatively, you can use a heat gun or hair dryer.

Next, create an opening using a suction cup and then insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, gently take out the back cover by holding the fingerprint button.

Next, pull out the logic board frame with the lens by undoing 10 screws.

Next, disconnect the battery plug by moving the fingerprint button.

Next, disconnect and pull out the not working wide, Ultra wide and macro cameras from the logic board.

Next, pull out the not working front camera from the board. For this you need to pull out the logic board from the body. First, disconnect both LCD and main flex connectors and then both antenna heads from the board.

Next, release the earpiece adhesive and then eject the SIM tray.

Next, gently pull out the logic board.

Next, flip the board to disconnect the front camera from the board.

Next, secure the new front camera to the board.

Next, secure the earpiece’s adhesive and then insert the SIM tray.

Next, connect both antenna heads, lcd, and main flex to the logic board.

Next, secure the new wide, Ultra wide, and macro cameras to the board, select the required broken camera, and place it on the board.

Next, connect the battery plug.

Next, secure the board frame by adding 10 screws.

Next, place the fingerprint button.

Next, before installing the main back cover, ensure it has enough glue. If not, use b7000 blue or new double-sided back to adhesive.

Finally, we added the binding clip to tighten the rear cover with the body. If not, you can use some rubber bands and leave them for some time.

Hope you have enjoyed the replacement guide let us know if you have any questions.