DIY OnePlus 9 Pro Back Cover Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, to remove the cracked back cover, it needs to heat gently around the back cover edges until the pasted adhesive becomes soft.

For this, we are using a heat gun.
Carefully Workaround on the edges, and apply heat to soften the glue on the back cover. Alternatively, you can use a heat Pad or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, take out the back cover and replace the new back cover with the camera lens.

If it is not damaged, you can always swap the camera lens, if not select the back cover with the camera lens.

Next, place the new back cover with adhesive. Most of the time, the replacement camera lens comes with adhesive; otherwise, you can use b7000 glue on the edges.

Finally, we are adding bonding clips to tighten the back cover with the body. On the other hand, you can use rubber bands and leave them for some time.

I hope you have enjoyed the replacement guide.Let us know if you have any questions.