DIY Xiaomi Redmi Note 9 Pro 5G |Max | 9s | Mi 10i | Mi 10t | Lite Front & Rear Camera Repair Guide

Before Starting, we need the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, remove the sim tray, and follow the back cover removal.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has been completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover, and remove the board frame by undoing ten screws.

Next, disconnect the battery plug.

Next, disconnect and take out the front camera.

Next, disconnect and take out 4 in 1 rear camera unit.

Next, pull out the macro, depth, ultrawide and wide cameras from the holder.

Replace the broken camera module with a new one and place it on the bracket.

Next, secure the rear camera module by connecting all four plugs.

Next, secure the new front camera by connecting the plug.

Next, secure the battery plug.

Next, add the board frame by adding ten screws.

Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.