DIY Huawei P20 lite Camera Lens Glass & Back Cover Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone and then remove the back cover.

Here, we are using a heating pad to remove the back cover, Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once you feel the heating is enough, use a suction cup to lift the back cover. In between, Insert a Plastic Card pry tool and gently cut the adhesive.

While taking out the back cover, Be gentle; the fingerprint plug is attached to the back cover.
Next, remove the fingerprint bracket by undoing two screws. Next, disconnect the battery plug and disconnect the fingerprint plug. Now the back cover unit can leave from the body.

Next, take out the broken camera lens glass from the back cover. Apply heat and push from the rear side to remove the broken lens.

There are a Few different replacement parts available for this repair. You can select the camera lens or camera lens with the back cover.

Select the preferred part, and if you have selected only the camera glass, place it on the back cover by adding glue.

Or if you have selected the back cover with lens, then make sure to transfer the fingerprint unit to the back cover.

Next, connect the fingerprint and battery plug to the board.

Next, place the shield by adding two screws.

Next, Before installing the main back cover, make sure it has enough glue, if not use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to fasten the back cover. Leave it for some time and remove it; if not, use some rubber bands to tighten the back cover.

I hope you have enjoyed the battery replacement guide. Let us know if you have any questions.