Samsung Galaxy A50 Charging Port Replacement Guide | Headphone Jack Repair (Galaxy A50s)

Hi everyone, welcome back to Geardo!

If your Samsung Galaxy A50 or Galaxy A50s is not charging properly, has loose cable connection issues, or your headphone jack is not working, then the charging port board may be faulty.

In this guide, we will show you how to replace the charging port & headphone jack board on the Samsung Galaxy A50. This guide is also fully compatible with the Samsung Galaxy A50s, as both devices share a very similar internal design.

This is a beginner-friendly repair guide, so follow each step carefully to complete the repair safely.

---

Repair Overview

• Device Type: Smartphone
• Repair Type: Charging Port & Headphone Jack Board Replacement

Repair Difficulty: ⭐⭐⭐☆☆ (Moderate)

Estimated Time: ⏱️ 40–60 minutes

---

Reasons for This Repair

• Phone not charging or slow charging
• Charging cable not fitting properly
• Headphone jack not working
• Intermittent charging connection
• Microphone issues (since it’s on the same board)

---

Before You Begin

Compatibility and Model Numbers

• Samsung Galaxy A50
• Samsung Galaxy A50s

This repair guide based on Samsung Galaxy A50 Model.

Model Numbers | SM-A505F, SM-A505FN, SM-A505GN, SM-A505G, SM-A505FM, SM-A505YN, SM-A505W, SM-A505X, SM-A505U, SM-A505GT, SM-A505U1, SM-A505G, SM-A505N, SM-S506DL, SM-A507F, SM-A507FN, SM-A5070

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

Using proper tools reduces the risk of damaging the phone.

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/4fUSCSb
  • Screen – https://amzn.to/4fUvjrC
  • Other Parts – https://amzn.to/3ULpQtt
• Silicone Work Repair Mat https://amzn.to/45Emz5l

---

Step-by-Step Repair Guide

Step 1: Power Off the Device

Turn off your Galaxy A50 / A50s completely before starting.

---

Step 2: Heat the Back Cover

Gently heat around the edges of the back cover to soften the adhesive.

• Use a heating pad (mobile heating mode)
• Or use a heat gun / hairdryer

---

Step 3: Remove the Back Cover

• Use a suction cup to create an opening
• Insert a plastic pry tool or card
• Carefully slide around edges to cut adhesive

---

Step 4: Remove Midframe Screws

• Remove the SIM tray
• Unscrew 13 screws from the top and bottom

---

Step 5: Remove the Midframe

• Use a plastic pry tool to separate the frame
• Gently release clips around the edges

---

Step 6: Disconnect the Battery

Disconnect the battery connector to avoid short circuits.

---

Step 7: Disconnect Bottom Board Connections

Move to the bottom section and disconnect:

• Touch ID connector
• Main flex cable
• Antenna connector

---

Step 8: Remove the Charging Port Board

• Apply slight heat to loosen adhesive
• Carefully lift and remove the faulty charging board

---

Step 9: Install the New Charging Board

• Place the new charging port & headphone jack board properly
• Ensure correct alignment

---

Step 10: Reconnect Components

Reconnect:

• Main flex cable
• Antenna connector
• Touch ID connector

---

Step 11: Reconnect Battery & Reassemble

• Reconnect battery plug
• Place the midframe back
• Ensure clips are secured
• Tighten all 13 screws
• Insert SIM tray

---

Step 12: Seal the Back Cover

• Apply adhesive if needed
• Use B7000 glue or double-sided adhesive

---

Step 13: Secure the Back Cover

• Use clips or rubber bands
• Leave it for proper bonding

---

FAQs (Frequently Asked Questions)

Q1: Is this guide compatible with Galaxy A50s?

Yes, the Galaxy A50 and A50s have similar internal layouts, so this guide works for both.

---

Q2: How do I know if my charging port board is faulty?

If your phone doesn’t charge, charges intermittently, or the headphone jack doesn’t work, the board likely needs replacement.

---

Q3: Can I repair just the charging port without replacing the board?

No, the charging port is part of a combined board, so the full unit must be replaced.

---

Q4: Is this repair difficult for beginners?

It’s moderate but manageable if you follow the steps carefully.

---

Q5: Will replacing this fix microphone issues?

Yes, since the microphone is integrated into the charging board.

---

Troubleshooting (After Repair)

Q1: Phone still not charging

• Check cable and charger
• Ensure connectors are properly seated

---

Q2: Headphone jack not working

• Recheck connection of the board
• Ensure correct part compatibility

---

Q3: No network signal or weak signal

• Check antenna connector is properly attached

---

Q4: Fingerprint sensor not working

• Ensure Touch ID connector is properly connected

---

Q5: Back cover not sticking

• Apply fresh adhesive
• Use clips or rubber bands for better hold

---

Final Thoughts

Replacing the charging port & headphone jack board on your Samsung Galaxy A50 or A50s can solve multiple issues like charging failure, headphone problems, and even microphone faults.

Take your time, follow each step carefully, and you’ll be able to complete the repair successfully.

I hope you enjoyed this repair guide! If you have any questions, feel free to ask.

Related Guides

Check other Samsung Galaxy A50/ A50s repair guides

Samsung Galaxy A50 Battery is Draining Fast

Check Samsung Galaxy A11 Repair Guides