DIY Xiaomi Redmi Note 9 Pro 5G | Max | 9s | Mi 10i | Mi 10t | Note 10 Lite Camera Lens Glass Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, take out the Sim tray, and follow the back cover removal.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover, and remove the board frame by undoing ten screws.

Next, Take out the broken camera lens from the frame. Apply heat to soften the glue and slightly push from the rear side to take out the lens.

Next, place the new camera lens glass with adhesive.

Next, add the board frame by adding ten screws.

Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.