DIY Huawei P20 Pro Camera Lens Glass Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, Take out the Sim tray and then the back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the rear cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Be gentle while taking out the back cover, the flash sensor plug is attached to the back cover. Disconnect and take out the back cover.

Next, Apply little heat on camera lens rings, and pull out the required broken camera lens ring by applying pressure from the rear side.

Next, place the required camera lens ring with adhesive and place it on the lens frame.

Next, Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

And also, make sure to connect the flash sensor plug.

Finally, we are adding bonding clips to tightened the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the repair guide. Let us know if you have any questions.