DIY Huawei P20 Pro Camera Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description.

First, turn off the phone. and take out the sim tray, and then follow with the back power removal.

Here, we are using a heating pad. To remove the back cover, place the back cover side on the heating pad, select the mobile phone heating option, and leave it till heating completes.

Alternatively, you can use a heat gun or hair dryer. Once you feel the heating is enough, use a suction cup to lift the back cover. In between, insert the plastic card pry tool and gently cut the adhesive around.

While you are taking off the back cover, be gentle. The flash sensor is attached to the back cover. To unplug the connector, move the back card to the left-hand side and undo the plug.

Take out the back cover and take out the board frame with NFC pad by undoing screws undo 9 screws and lifting the frame using a bright hole.

Next, unplug the battery antenna lcd and mainflex cable connectors.

Next, disconnect the front camera and pull out the logic board by using a tweezer.

Now, gently pull out the front camera.

Next, on the logic board’s rear side, disconnect both plugs and pull out the rear camera module by peeling the tape. The camera comes as a three-in-one unit.

Next, replace the broken front or rear camera with a new unit and add cameras to the body first, place the front camera, and then at the rear camera with the tape.

Ensure the connection is secured, and then place the logic board.

Next, fasten the lcd main and antenna connectors.

Next, t secure the battery connector and place the board frame with NFC by adding nine screws.

Before installing the main back cover, ensure it has enough glue on it. If not, use b7000 glue or new double-sided back cover adhesive.

Next, connect the flash sensor plug and place the back cover on the body.

Finally, we are adding bonding clips to fasten the back cover, leave it for some time, and remove it. If not, use some rubber bands to tighten the back cover.

Hope you have enjoyed the camera replacement guide. Let us know if you have any questions.