DIY Huawei P30 Camera Lens Glass & Back Cover Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, take out the Sim tray, and then follow with the back cover removal.

Here, we are using a heating pad to remove the back cover; place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once you feel the heating is enough, use a suction cup to lift the back cover. In between, Insert a Plastic Card pry tool and gently cut the adhesive.

Next, take out the back cover,

Next, take out the broken lens from the back cover. Apply little heat and push from the rear side to remove the broken lens.

Next, clean the surface and place the new camera lens glass by adding adhesive.

Next, if needed, can take out the cracked lens with the frame. First, apply heat on the lens area from the front side of the back cover.

Next, slightly apply pressure from the front side to take out the lens with the frame.

Next, secure the new camera lens with the frame in the back cover by applying adhesive.

Next, Before installing the main back cover, make sure it has enough glue; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to fasten the back cover. Leave it for some time and remove it; if not, use some rubber bands to tighten the back cover.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.